RV-9A: Right Wing Prep - 12/2/2006
Home Previous Entry Next Entry Back |
Share on:
|
|
 Riveted on the access panel platenuts
There are 3 sets of these platenuts on the main spar. I countersunk the spar for the flat head rivets that hold the platenuts on, making sure to spot prime each countersink before riveting.
|
 Primed all of the countersinks
After I attached the access panel platenuts, I countersunk the main spar using a #40 countersink and used my scrap piece of sheet aluminum with a #6 dimple in it to check the depth of the countersink. Then I primed all of the countersinks with one swoop of the rattle can primer and wiped off the excess.
|
Home Previous Entry Next Entry Back
|
