|
Share on:
|
|
|
And Voila! Zee Black Snot is ready!
I turned the white mixing rod counter-clockwise and unscrewed it from the tube. Then I screwed in the clear nozzle. I removed the red cap from the opposite end of the main tube and put the tube into a Home Depot caulk gun. It seemed a little small for the caulk gun, but I knew it work. UPDATE: 2/19/2006 I found when working on the left elevator trailing edge that I didn't have the blue caulk handy, so grabbed another that I had laying around the shop. The push plunger wouldn't go into the end of the tube. I went to lowes and got another one that had a smaller pusher. This one worked but it was really tight inside the proseal tube. I suggest that if you use a caulk gun like I did, get one where you can rotate the push rod inside the gun. Then you can file down the pusher disk on the end to fit inside the proseal tube.
|
|
